Anti-Seize Spray
Copper based aerosol applied anti-seize lubricant similar to Anti-Seize compound. Use to protect all kinds of threaded components where the convenience of aerosol application is preferred. Temperatures up to +1100^oC.

Penetrating Spray
Powerful jet spray of penetrating oil containing MoS₂ (moly) helps release seized components affected by rust, dirt or scale and provides lubrication during dis-assembly. Film protects against damage and further corrosive attach.

Wire Rope Spray
Aerosol applied wire rope lubricant containing MoS₂ (moly) and other anti-wear additives. Leaves a film, which gives similar operating characteristics to Recol Wire Rope Dressing. Temperature range -30^oC. to +100^oC..

Tufgear Spray
Provides a thin water-repellent film with good load carrying capabilities. Highly tenacious, will not throw off in opeatrion. Use on small gear trains, gears on overhead equipment and for application through guards onto moving gears. Temperature range -10^oC. to +100^oC..

Electra Clean Spray
A high performance cleaner suitable for electrical components and equipment, including contacts, switches, motors and windings, in addition to a high level of cleaning efficiency conductivity. Do not use on live or energized equipment. Food safe - contains only FDA listed ingredients, NSF K2 Registration.

Heavy Duty Cleaner Spray & Fluid
A powerful, non-chlorinated, slow evaporating solvent blend which can be emulsified with water if required allowing built up dirt and grease to be easily removed by either wiping or water washing. Leaves no oily film, Harmless to most plastics and paints.

Dry Moly Spray
Aerosol applied thin, dry film of resin bonded MoS₂ (moly) which withstands high loads and temperatures. Does not pick up dirt and dust. Use as a dry film lubrication on slides, gears, plain bearings, as an anti-seize on precision threaded components and in applications where contamination of finished components connote be tolerated. Temperature range up to +450^oC.

Belt Dressing Spray
A non-toxic colourless fluid designed for the conditioning treatment of all types of drive and conveyor belts. It ahderes strongly to any belt material giving instant grip and preventing slippage, whilst preventing build up of dirt and grease. Temperature range +5^oC. to +100^oC.. Food safe - contains only FDA listed ingredients. NSF H1 Registered.

WD Spray
A general purpose, water displacing maintenance penetrant spray. WD Spray provides light lubrication and a short term corrosion resistant film.